Hey guys,
I was curious how many regular knife sharpeners felt like they had to buy the US-430. So here goes, thanks !
I was curious how many regular knife sharpeners felt like they had to buy the US-430. So here goes, thanks !
Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuAbbreviation | Elaboration | Meaning/Reference |
dps | Degrees Per Side | Half the total bevel angle, or angle between one side of the bevel and the plane of symmetry of the blade |
HRC | Hardness on Rockwell Scale C | Indicates the toughness of the blade, its resistance to indentation |
BESS | Brubacher Edge Sharpness Scale | Measures the sharpness of the blade at a given point along the blade, at a given instant. |
CBN | Cubic Boron Nitride | A synthetic crystal with a hardness second only to diamond |
Reference | Name |
US-105 | universal support for T-7 & T-8 |
XB-100 | Support base (plate and knobs only) |
MB-100 | Multi-Base |
USB | Universal support bracket |
BGM-100 | Bench grinder mounting set |
SVM-45 | Knife jig |
SVM-140 | Long (and flexible) knife jig |
SVM-00 | Small knife jig |
SVA-170 | Axe jig |
SVS-38 | Short tool jig |
SVD-185 | Gouge jig (old) |
SVD-186 | Gouge jig |
SVS-50 | Multi jig |
SE-76 | Square edge jig (old) |
SE-77 | Square edge jig |
SVX-150 | Scissors jig |
SVD-110 | Tool rest |
SVH-320 | Planer blade attachment |
SVP-80 | Moulding knife attachment |
DBS-22 | Drill bit sharpening attachment |
TT-50 | Truing tool |
SP-650 | Stone grader |
WM-200 | AngleMaster |
TTS-100 | Turning tool setter |
LA-120 | Profiled leather honing wheels |
LA-124 | Narrow profiled "discs" (leather honing wheels) |
RB-180 | Rotating base |
RM-533 | Rubber work mat |
PA-70 | Honing Compound |
ACC-150 | Anti-Corrosion Concentrate |
SG-200/250 | Original grindstone |
SB-250 | Blackstone silicon grindstone |
SJ-200/250 | Japanese waterstone |
DC-200/250 | Diamond Coarse |
DF-250 | Diamond Fine |
DE-250 | Diamond Extra-fine |
QuoteSince the surface left by the Japanese Waterstone is so fine, we do not recommend honing afterwards on the leather honing wheel.
Page created in 0.053 seconds with 18 queries.