Messages

Have a look here

while the blade is 0,6 mm thick.

If I had known that, I wouldn't have posted.

I'm glad you found a solution that meets your needs. I have never sharpened a knife with a spine thickness of 0.6 mm, so I can't really contribute a solution.

Personally, I believe that the jig for long knives is not designed to support extremely thin blades. I haven't seen a specified lower limit for suitable spine thickness, but it seems obvious that sharpening something as thin as a piece of aluminum foil would be difficult to work with the setup.

That said, I've never tried it myself, and I don't know the practical limits.

Eric
Please try sharpening with much less pressure. The smile is very likely not caused by the jig.

Have a look here https://schleifjunkies.de/en/product/adapter-for-2-wheel/

I've read all the articles on his blog — most of them several times. They're real eye-openers. I'm inclined to trust him, though it's difficult to verify his claims without access to an electron microscope.

Glad to see some progress.
I will not call them and remain standby. Fingers crossed.

Mykola
I will call them tomorrow. Lets see.

I'm surprised to hear about your problems with this reputable supplier.
The best would be to give them a call. I assume they speak english.
If this would be inconvenient for you, I could call them and try to bring them in contact with you. I'm based in Germany.
If you are interested, send me some contact info and if possible a PO number or something I could refer to.

Use this

much used.Do you

Why did you hide that URL "https://used.do" in your text??

https://youtu.be/uj8P6O-qIYs
Here is a Tormek Video for gardening tools. Minute 53:53 shows a brush cutter blade sharpening.

Was it that one? https://www.youtube.com/watch?v=BC3xlKrJUtg

Infos regarding metal dust:
https://biologyinsights.com/what-happens-if-you-inhale-metal-dust/

Great writeup. New members will be grateful.

Thats great news. Unfortunately  helpful for nobody.