News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Tormek fine grit options CBN/Diamond

Started by Cjeanes, January 17, 2022, 07:39:14 PM

Previous topic - Next topic

Cjeanes

Hello everyone!

I just got my 800 grit CBN wheel and I didn't particularly like the scratch pattern it left on my knives. I'm curious as to what time grit options everyone is using? Would I be better suited in looking into purchasing a 1000 or 1200 grit CBN wheel? Does anyone have any experience with the 600 or 1200 fine grit diamond wheels?


Thanks for any advice!

Ken S

Welcome to the forum, William.

A suggestion I learned from one of Tormek's top knife experts: When you are using your grinding wheel, use very light pressure on the final passes. That will lighten the scratch pattern.

I would try this before purchasing another grinding wheel.

Please keep us posted.

Ken

Cjeanes

Will do Ken, thanks! I'm still very new to the Tormek system so still learning the process.