News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Why No CBN Wheels > 1200?

Started by darita, May 31, 2023, 03:42:25 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

darita

May 31, 2023, 03:42:25 PM
Just wondering why there are no CBN wheels finer than 1200 grit? Is there another alternative that doesn't need truing and won't change diameter?

3D Anvil

#1
May 31, 2023, 04:07:39 PM
There are resin-bonded CBN wheels in grits up to 10k.  They will change diameter over time, but very slowly and by a very small amount.  And of course they are pricey.

https://www.amazon.com/Resin-Grinding-Tormek-Sharpening-System/dp/B0BS9GY6HJ?ref_=ast_sto_dp

darita

#2
May 31, 2023, 11:11:28 PM
Thanks!  Just what I was looking for.
Print
Go Up Pages1
User actions