Roughing gouge grind.

Welcome to Tormek Community Forum.
Log in
Sign up

November 21, 2024, 03:30:19 PM

News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Home

Roughing gouge grind.

Started by Tamworthturner, January 22, 2021, 04:46:27 PM

Previous topic - Next topic

Print

Go Down Pages1

Tamworthturner

Newbie
Posts: 3
I'm a sharp craftsman!
Logged

Roughing gouge grind.

January 22, 2021, 04:46:27 PM

Another roughing gouge question, is the a setting with the SVS-50 using the TTS-100 to produce as 45 degree bevel on the gouge?

RichColvin

Hero Member
Posts: 982
Ornamental Turner, Gardener, & Beekeeper
Logged

Re: Roughing gouge grind.

#1

January 23, 2021, 02:28:58 PM

Here is what I use : http://sharpeninghandbook.info/WW-SpindleRoughingGouge.html

Rich

---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail. What you do between those is up to you.

Print

Go Up Pages1

User actions

Print