Print Page - Roughing gouge grind.

Title: Roughing gouge grind.
Post by: Tamworthturner on January 22, 2021, 04:46:27 PM

Another roughing gouge question, is the a setting with the SVS-50 using the TTS-100 to produce as 45 degree bevel on the gouge?

Title: Re: Roughing gouge grind.
Post by: RichColvin on January 23, 2021, 02:28:58 PM

Here is what I use : http://sharpeninghandbook.info/WW-SpindleRoughingGouge.html (http://sharpeninghandbook.info/WW-SpindleRoughingGouge.html)

Rich

Tormek Community Forum