News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Can you true a SJ 250 stone

Started by src2335, January 28, 2018, 10:54:22 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

src2335

January 28, 2018, 10:54:22 PM
New user here .
I have t8 .
Can you true thesj250 stone with the profiler

wootz

#1
January 28, 2018, 11:27:53 PM Last Edit: January 28, 2018, 11:36:32 PM by wootz
Welcome to the forum, mate.

Yes you can, but have to take certain precautions not to chip the SJ wheel edge.
Have a look at these two threads:

https://forum.tormek.com/index.php?topic=2313.msg11195#msg11195
Stickan in this thread is a Tormek representative in the USA

and a good thread on truing, SJ included:
https://forum.tormek.com/index.php?topic=3053.msg16372#msg16372

RichColvin

#2
January 28, 2018, 11:36:42 PM
Slow and easy, wins the day (as they say, whomever "they" are ...).

Rich
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.

Ken S

#3
January 29, 2018, 11:50:42 AM
I am one of "they".  :)

Ken
Print
Go Up Pages1
User actions