10” split felt wheel

[WagonHo!]

Greetings
I recently acquired a used T-7 and am in the process of refurbishing the unit. I'm looking for a split felt wheel rock hard or flint 10" for burr removal on serrated knives. I noticed some of you use a felt wheel for polishing could you direct me to a vendor. Thank you

[Drilon]

Here are two (non US) companies: www.knifegrinders.com. au and https://www.mototechnica-shop.de/spezial-filzscheibe-filzrad-zum-messerschleifen-und-polieren-spez-gew-1-00-flint-hard-o-200-mm-oder-o-250-mm-abgeschraegt.html

Regards,
Drilon

[cbwx34]

Greetings
I recently acquired a used T-7 and am in the process of refurbishing the unit. I'm looking for a split felt wheel rock hard or flint 10" for burr removal on serrated knives. I noticed some of you use a felt wheel for polishing could you direct me to a vendor. Thank you

Knifegrinders sells them... KnifeGrinders Equipment

(I thought SchleifJunkies did too, but don't seem the on the website... but he has other things you might find of interest).

[WagonHo!]

Here are two (non US) companies: www.knifegrinders.com. au and https://www.mototechnica-shop.de/spezial-filzscheibe-filzrad-zum-messerschleifen-und-polieren-spez-gew-1-00-flint-hard-o-200-mm-oder-o-250-mm-abgeschraegt.html

Regards,
Drilon

Thank you for the link. I took three years of German in High school(Stone Age) and actually ordered some Tormek accessories from Germany so this will work for me as I can read it better than speak it.
I ordered a Mafell track saw and that is a thing of beauty.

[WagonHo!]

Greetings
I recently acquired a used T-7 and am in the process of refurbishing the unit. I'm looking for a split felt wheel rock hard or flint 10" for burr removal on serrated knives. I noticed some of you use a felt wheel for polishing could you direct me to a vendor. Thank you

Knifegrinders sells them... KnifeGrinders Equipment

(I thought SchleifJunkies did too, but don't seem the on the website... but he has other things you might find of interest).

I just read your post on bladeforum about the replacing the stop nut on the knife jig to compensate for blade curvature, brilliant! Thank you for the link. This T-7 dropped from the heavens to me for a pittance of $40.00,but The accessories are adding up fast.

[cbwx34]

I just read your post on bladeforum about the replacing the stop nut on the knife jig to compensate for blade curvature, brilliant! Thank you for the link. This T-7 dropped from the heavens to me for a pittance of $40.00,but The accessories are adding up fast.

A "Pivot Collar" of some sort, and one of the calculators to set the angle, is the best options for sharpening knives.... use them the mostest.

[BeSharp]

Durofelt in the US has a 6" wheel, but not a 10":

http://www.durofelt.com/image_55.html

They also have a new 10" felt wheel for "Tormeck" grinders:

http://www.durofelt.com/image_8.html

I have their 6" knife edge felt wheel for bench grinders:

http://www.durofelt.com/image_2.html

Very nice people to deal with.

[Ken S]

From the Duro Felt website:


Item   OD   ID   Thick   Density   Price
FW1011SB   10"   1"   1"   Soft - 0.50 gm/c3   $61.00 each + Pop-Up Bushing
FW1011MB   10"   1"   1"   Medium - 0.60 gm/c3   $66.00 each + Pop-Up Bushing
FW1011HB   10"   1"   1"   Hard - 0.70 gm/c3   $71.00 each + Pop-Up Bushing
FW1011RHB   10"   1"   1"   Rock Hard - 0.80 gm/c3   $76.00 each + Pop-Up Bushing


Item   OD   ID   Thick   Density   Price
FW1012MB   10"   1"   2"   Medium - 0.60 gm/c3   $107.00 each + 2 Pop-Up Bushings
FW1012HB   10"   1"   2"   Hard - 0.70 gm/c3   $127.00 each + 2 Pop-Up Bushings
FW1012RHB   10"   1"   2"   Rock Hard - 0.80 gm/c3   $150.00 each + 2 Pop-Up Bushings

I didn't see any ten inch split felt wheels.

Ken