News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

New Organizing Cabinet/Stand for Tormek?

Started by BobD, March 19, 2020, 01:58:19 PM

Previous topic - Next topic

BobD

I've recently purchased some new supplies for my sharpening room, including this new cabinet to reorganize things and a couple 3/4" heavy duty rubber mats. Figured I would share a couple of them that could be relevant/useful to Tormek users.

I just received this cabinet and threw some stuff inside to show its size to scale with things everyone would recognize, it's not the way I'm keeping everything or in the right location. I have considered using it as an alternative stand as Tormek's Rubber Mat fits very nicely on top but I would use something hard underneath to distribute the weight more evenly because it's obviously not designed for that. It's too soon to judge how well it's going to hold up or make recommendations yet but I will say it was very budget friendly... About $90 to my door.


Ken S


chino

That is pretty cool. Good storage space for wheels, too.

John_B

Looks like a great setup with ample storage.
Sharpen the knife blade
Hone edge until perfection
Cut with joy and ease

Ken S

I would suggest placing grinding wheels in a lipped plastic tray. The "Traditional" wheels can retain moisture for several days. (I speak from experience, having a couple moisture damaged wheel boxes,)

Ken