LA-120 with T4

[martyn.bray]

Does the LA-120 leather honing wheel fit on the T4?

[Ken S]

Welcome to the forum, Martyn.

Yes, the LA-120 also fits the T4. The shafts have the same thread. In fact, all the jigs are interchangeable.

Ken

[Ken S]

A follow up thought:

Not only do the T7 and T4 accept all of the same jigs, they include the same handbook. The only difference I have found in the jigs and accessories, aside from the difference in wheel size and water trough, is that the universal support bar is ten millimeters shorter with the T4. The practical reason for this is to allow the screw in end stop with the SE-76 to prevent the jig held blade from falling off the end of the slightly narrower grinding wheel.

My preliminary tests also indicate that both models have approximately the same cutting speed.

Ken