News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

second USB horizontal position?

Started by Ken S, March 30, 2015, 01:06:49 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Ken S

March 30, 2015, 01:06:49 PM
Sometimes I have ideas which may or may not have practical applications in the real world. Using a BGM-100, it is possible to add an additional USB horizontal position to the Tormek. This would allow the more agressive grinding of the vertical position to be done with the jig or platform to be flat (horizontal).

I have not decided if this would be a useful alternative or just a complication.  Any thoughts?

Ken
Print
Go Up Pages1
User actions