News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Sharpening On Stone w/ Leather Wheel Removed For Additional Clearance?

Started by Thy Will Be Done, July 16, 2022, 06:45:14 PM

Previous topic - Next topic

Thy Will Be Done

Quote from: 3D Anvil on July 24, 2022, 05:53:01 PM
I get the concept -- not wanting to polish out the toothiness of the edge -- but I just don't see the benefit in practice.  If you want a toothy edge, just finish on a coarser stone and strop lightly.  As far as refined edges and tomato slicing, that hasn't been my experience.  If an edge is sharp enough to split a hair on contact, it will sail through tomato skin like it isn't there.

It's also a matter of edge retention, coarse edges function more like a saw or serrated knife in the sense that they retain those peaks and valleys despite being worn down significantly.