News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

2 birds with one piece of 1200g👍

Started by PE Pete, November 13, 2020, 08:12:26 PM

Previous topic - Next topic

PE Pete

So recently acquired my T4 and had a couple of minor irritations.
1: Developed a small chip on the edge of the SJ200.
Started out very gently and very slowly using an off cut of suede but that was taking forever.
So got some 1200g sandpaper and boom sorted it I'm minutes.
I've now done both edges.

2: The bump on honing wheel where the leather is joined was bugging me so again 1200g to the rescue.
Needless to say I'll be doing both these procedures with any new wheels in the future.
Cheers Pete

Josu V

Quote from: PE Pete on November 13, 2020, 08:12:26 PM
2: The bump on honing wheel where the leather is joined was bugging me so again 1200g to the rescue.


Interesting. I will prepare my 1200 grit sandpaper  :)

Regards
Abusus non tollit usum

RichColvin

I got a few chips in the edge of mine when I was not using the TT-50 correctly. (The video on using the TT-50 taught me how to do that correctly.)


In any regard, I ignored the chips and it works fine.  No issue.


Kind regards,
Rich
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.