News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - JCB

#1
I have used the recipe for chromium oxide paste that was described by Vadim and it worked very well.  I did use it on a Tormek leather wheel. I just want to mention that he recommended refined linseed oil.  The common linseed oil used by wood workers is boiled linseed oil.  Vadim, such a perfectionist, would not have put in that detail if it was not important.  The refined linseed oil is much lighter in color.
#2
I would like to echo what other members said.  If possible keep both K03 and the Tormek.  Like you, I have had a KO3.  I have used this for a number of years and added a Tormek T8 because of its versatility and purely because it is such a nice tool to use.  I sharpen most knives on the Tormek.  With some of my knives I use the KO3 to sharpen and then the FVB and Vadim's angle tool to hone.  I have been very happy with the result.  Much better than trying to hone on the K03.
#3
Hi Guys,
Thank you for the replies.  The Japanese knives that I have are  Aogami/Blue super carbon steel, double beveled The traditional single beveled knives that I have [Deba, Usuba and a Yanagiba] are White No2 high carbon steel.  The single beveled knives have to be sharpened on wet stones the traditional way.  The double beveled knives I have been sharpening  on a TSprof with chosera stones.  As mentioned I have used the leather wheel with Tormek paste, followed by chromium oxide paste.  I follow up with light hand stropping and have been able to get some sub 60 Bess scores.  Used correctly the edge retention is remarkable.  I was thinking of just using the Tormek and was wondering what grinding wheels to use.
I am fascinated by the history and skill/workmanship of the Japanese blacksmiths.  Please do not ask me why I would like to have a knife with a Bess score of 50.  I cannot think of one good practical reason except that I love preparing food with the with one of those.
I actually enjoy most knives and find great pleasure in sharpening them to the best of my abilities ...... makes my friends happy.  There is always room for improvement so I was delighted to find this forum
The second question was is that I am not sure what a super steel is.
Kind regards
#4
This would be my first post as a member of the Tormek Community.
I have been interested in knives and knives sharpening for many years.  I have a number of carbon steel Japanese kitchen knives.  To date I have been sharpening with the TSProf K03 system using Chosera stones.  I have a Tormek 8 which I have used to sharpen a number of different kitchen knives in the more "middle of the road" quality.
I have only used the leather wheel with the Tormek honing compound and a leather wheel with chromic oxide which Dr Kraichuk (RIP) described on YouTube.  I also use his angle setter up for FVB.
To date I have been too "chicken" to actually sharpen the knives on the Tormek wheels.
I was wondering if anybody with more experience could give me some guidelines
I am also not quite sure what is meant by "super steel".  Does this referred to the type of steel or the Rockwell hardness?
Thanks for your help
Kind regards