Ich frage mich wozu??
- Welcome to Tormek Community Forum.
News:
Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
#93
Knife Sharpening / Re: BESS Tester
January 13, 2020, 06:51:19 PM
i have the tester since a few month.
best decision ever
finally a comprehensible sharpnestest
because of same prerequisites for everyone results are comparable
cheers Hanns
best decision ever
finally a comprehensible sharpnestest
because of same prerequisites for everyone results are comparable
cheers Hanns
#94
Knife Sharpening / Re: FVB Order with KnifeGrinders
January 13, 2020, 06:45:47 PM
Hi all,
it needs bit longer then normal to get the items from Vadim but as Ken saying have faith because Vadim is a real honest bussinesman.
cheers Hanns
it needs bit longer then normal to get the items from Vadim but as Ken saying have faith because Vadim is a real honest bussinesman.
cheers Hanns
#95
Knife Sharpening / Re: Honing only with Tormek possible instead of paper?
December 22, 2019, 11:20:23 AM
If u can wait a bit till after Chrismas i will do a test with following equipment:
1. 160 grid CBN Wheel
2. 400 Gide cbn
3. 1000 grid cbn
4. feltwheel rockhard with Autosalon paste (thing around 6000 grid like Tormek paste)
5. leatherwheel with chromium oxyde green
Planed to make a video of it.
Cheers Hanns
1. 160 grid CBN Wheel
2. 400 Gide cbn
3. 1000 grid cbn
4. feltwheel rockhard with Autosalon paste (thing around 6000 grid like Tormek paste)
5. leatherwheel with chromium oxyde green
Planed to make a video of it.
Cheers Hanns
#96
Knife Sharpening / Test grind with CBN-Wheels from Wooz
November 21, 2019, 10:07:16 PM
Hi Guys
I am new here
My name is Hanns and i am from Germany.
I read here a lot and learn a lot 2.
Sorry but English is not that good but i hope u guys understand what i like to say.
After watching tonns ofvideos in YouTube about knifegrinding i buy myself a Tormek T8 beginning this year.
I found on YouTube also the Videos of Vadim and like a lot what he shows also was thrilled by his techniques.
At the end i buy in his shop 3 CBN-Wheels.
They arrived few days ago and i was very happy. I made a video and putt it online on my Chanel.
1 Day later i get a mail from Vadim. He tells me that its not nessesary to make with the 400 and 1000 grid wheel more than 1 pass each side.
Was bit confused about that always thought more helps more
So i decided to test that.....
Through my job i know the CEO of Giesser Knifes Germany and i ask him if its possible to have some second choice Knifes to practice knifefgrinding and he spend me almost 20 different knifes (happy)
For my test i take one of this knifes a 20€ Chefsknife so not high quality but for my test ideal.
In pain i make the knife dull on the stonegrader from Tormek
The i grind the knife first on 160 grid CBN
Then the 400 and 1000 grid with only 1 pass each side.
At the end 2 passes on the leather wheel with Autosol paste.
All measured with the new software from wooz and the FVB 2
The result was awsum. Really sharp. Making video at Saturday and Monday i get from US my Bess sharpener tester.
First knife i messure was this Giesser knife BESS was 97 and this with a 20€ knife. Was speechless.
If someone wanna see the video (sorry in German) here is the link
https://youtu.be/V9d6-R38uQ8
Hope its ok to putt the link in, if not MOD pls delete it.
Cheers Hanns
I am new here
My name is Hanns and i am from Germany.
I read here a lot and learn a lot 2.
Sorry but English is not that good but i hope u guys understand what i like to say.
After watching tonns ofvideos in YouTube about knifegrinding i buy myself a Tormek T8 beginning this year.
I found on YouTube also the Videos of Vadim and like a lot what he shows also was thrilled by his techniques.
At the end i buy in his shop 3 CBN-Wheels.
They arrived few days ago and i was very happy. I made a video and putt it online on my Chanel.
1 Day later i get a mail from Vadim. He tells me that its not nessesary to make with the 400 and 1000 grid wheel more than 1 pass each side.
Was bit confused about that
always thought more helps more So i decided to test that.....
Through my job i know the CEO of Giesser Knifes Germany and i ask him if its possible to have some second choice Knifes to practice knifefgrinding and he spend me almost 20 different knifes (happy)
For my test i take one of this knifes a 20€ Chefsknife so not high quality but for my test ideal.
In pain i make the knife dull on the stonegrader from Tormek
The i grind the knife first on 160 grid CBN
Then the 400 and 1000 grid with only 1 pass each side.
At the end 2 passes on the leather wheel with Autosol paste.
All measured with the new software from wooz and the FVB 2
The result was awsum. Really sharp. Making video at Saturday and Monday i get from US my Bess sharpener tester.
First knife i messure was this Giesser knife BESS was 97 and this with a 20€ knife. Was speechless.
If someone wanna see the video (sorry in German) here is the link
https://youtu.be/V9d6-R38uQ8
Hope its ok to putt the link in, if not MOD pls delete it.
Cheers Hanns