Topics

I found the excellent threads discussing the Kenjig and Dutchman tables.  It seems the discussions and Dutchman's tables were developed for the knife jig.

I would like to develop some quick-set jigs for plane irons and chisels.  I have the old-style square jig, if that matters.

I don't see any reason why I could not use Dutchman's equations to develop settings for my purpose, but I thought I would throw this out to more experienced users first.

Thanks.
Steve

I posted a few weeks ago that I am the new owner of a Tormek Supergrind 2000.  I got it cleaned up, got the truing jig and a new usb and a new horizontal support base, and a few other jigs.  I wish I remembered to get the honing compound also.  It will be here Tuesday.

The grinding stone was out of true by about 1/8".  It took a while to get it round.

I took a test run on the grinding stone with an old chisel and I am amazed at how fast I have a nice new bevel!

I could also see that the leather honing wheel was out of true - by about 1/8".  I assumed the high spot was at the seam, but it is not.  The trouble spot is about 5 inches along the circumference of the wheel.  I tried using a piece of sandpaper on a piece of wood (supported by the SVD-110 support) to true the wheel with the machine running.  I think it helped, but not much.

The axle that supports the honing wheel is not the culprit.  It is not machined perfectly, but it is not the cause of this issue.

My efforts to search for past threads did not turn up much as far as solutions.

Any ideas?  Do I need to order a new honing wheel?  This thing was not heavily used before I bought it.

Thanks.

Steve

I acquired a used Tormek 2000 Supergrind this past weekend.  It appears to be in good condition, with evidence of very light use.  I spent a few hours reading through this forum already, and I am glad to have a resource like this!  I have a few questions up front as I get ready for use, and to make a few upgrades.

I will mostly use this machine for sharpening plane irons and chisels.  I would like to also sharpen knives and scissors, and I see strong potential for me to sharpen scrapers, planer and jointer blades, and probably many other things.

I hate to overthink some of the small things, so who better to ask than some seasoned users?

1) TT-50 
I have not used the machine yet, because the stone appears to be very badly out of round (as much as 1/8", based on visual observation).  I will be ordering the TT-50.

2) New Universal Support
The literature states that the old Universal Support can be used for the TT-50, but advises that the new Universal Support has benefits.  I would appreciate comments on need for the new version, based on the experience of other users.  If it will give better results for truing, and has benefits for other applications, I will make the investment.

3) Horizontal Support
My current horizontal support only has one thumb screw to secure the Universal Support.  Without exerting very much force on the Universal Support (where a jig would be mounted), I can easily deflect the arm of the Universal Support (1/16" ?), and I can also see movement of the "non-secured" arm of the Universal Support in the horizontal support.  I realize this arrangement has provided excellent results for other users for many years, but it makes me wonder if the new Horizontal Support (with two thumb screws) would reduce unwanted movement when the machine is in use (when it matters).  After all, the improvements were developed for a reason.

4) Grading Stone
The grading stone appears to be dished.  Maybe improper use of the grading stone caused the sharpening stone to be out of round.  Any advice for flattening the grading stone?

It is easy to see that the cost of upgrades adds up, but these pieces seem to be an important part of the function of the machine.  I don't want to start off on the wrong foot by taking a short-cut.

Any responses to my items listed, or other general comments, would be appreciated.  Thanks.

Steve