News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Tormek Original Grindstone or Blackstone

Started by capt., January 30, 2009, 03:29:03 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

capt.

January 30, 2009, 03:29:03 AM
I have had a Tormek 2000 for a number of years. It is time for a new grindstone.
Most of my sharpening is high speed steel turning tools.
Would I be better off with the new blackstone or another original grindstone?

Jeff Farris

#1
January 30, 2009, 05:39:14 AM
Most turners that have tried the Blackstone are thrilled.  Faster cutting and better stone wear.
Jeff Farris

romanf

#2
February 03, 2009, 08:43:47 PM
I can't find pricing on the smaller size wheel for the T-3. Do you know what it costs and who stocks it? Thanks Jeff.

Jeff Farris

#3
February 03, 2009, 10:06:13 PM
The Blackstone is not available for the T-3. 
Jeff Farris

MarkP

#4
February 21, 2009, 01:16:16 PM
Are there any plans for a smaller version for the T3 (or in my case a 1206)? This sounds an ideal wheel for woodturning skews and the like.

Jeff Farris

#5
February 22, 2009, 02:55:55 AM
At this time, there is no plan to develop the SB for the smaller machine.
Jeff Farris
Print
Go Up Pages1
User actions