News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

US-430 height

Started by Aerojunkie, June 01, 2025, 11:31:01 PM

Previous topic - Next topic

Aerojunkie

Hello all. New user getting started with a quick question please. What is the maximum height above the stone on a supergrind 2000 using the US 430? I have used the standard usb with an assortment of smaller blades and had good success but I have a few wide knives(smaller cleavers) that I want to sharpen. The standard usb doesn't have enough height and before spending the cash I would like to know if its gonna work. I use and app for setting the angles so I just need the max height from the 10" wheel to the top of the usb to find out what the limits are. Thank you in advance.

rolsen

Normal USB measured from underside of the bar to the end of the threaded part = 146mm
US 430 = 200mm

Ken S

Welcome to the forum, Michael.

I suggest you purchase your US-430 from a dealer which offers freereturns within thirty days. That will give you a hands on test to verify thatyour cleaver will work with it.

Ken