News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Tormek PW-160 for Tormek T4?

Started by Ullinator, April 05, 2025, 10:58:11 PM

Previous topic - Next topic

Ullinator

Hello everyone
Does anyone know if the Tormek PW-160 composite wheel fits the Tormek T4?

Ken S

Welcome to the forum, Ulli. Yes, the PW-160 does fit the T2. Within an hour of when my T2 arrived, I placed both the PW-160 honing wheel and the DWF-200 diamond wheel mounted on my T4.

The machines, except for the knife jig, are identical. The difference is that the T2 is part of Tormek's Culinary Group.

Ken

Ullinator

Thanks, Ken!
I ordered the PW-160 and discovered that this disc doesn't fit.
I'll return it and look for another alternative.

Ken S

Ulli,

I don't understand why the disc doesn't fit. The T2 and T4 use the same shaft. Are you placing the composite honing wheel where the leather honing wheel normally goes?

Please give me a couple days before you return the PW-160. I will doublecheck everything with my T2 and T4. I will get back to you.

Ken

Ken S

Ulli,

I just checked with my T2 and T4. Either the leather composite wheel (PW-160) or the leather honing wheel are exact fits on either machine. make sure you are on the honing wheel end of the shaft.

Ken