News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

T-8 Water Trough Lifter Sticking

Started by Denned, February 16, 2024, 11:28:56 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Denned

February 16, 2024, 11:28:56 PM
Has anyone else experienced the water trough sticking when trying to raise the trough on the T-8.  Mine takes a bit of persuasion when lifting especially after reloading the trough.  The black knob is also coming out with the washer and spring.  I seem to have to help it by wiggling the bottom bracket.  Is there something that I should be servicing?  Thanks, Denis

Ken S

#1
February 17, 2024, 03:57:31 AM
Denis,
I suggest you email support (support@tormek.se).
Ken

RichColvin

#2
February 17, 2024, 03:42:05 PM
I'm interested in hearing what you find
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.

cbwx34

#3
February 17, 2024, 06:21:16 PM
Definitely contact support...

https://forum.tormek.com/index.php/topic,3285
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)
Print
Go Up Pages1
User actions