News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

super fine grade stone

Started by jeffs55, June 24, 2008, 02:40:25 PM

Previous topic - Next topic

jeffs55

I bought a supposedly 4000 grit Japanese waterstone for my Tormek. That sucker wobbled terribly after mounting . I checked the arbor and the bushing that the drive shaft goes through was flat to the frame. I put the original Tormek stone back on and it did not wobble. It didnt wobble before removal either. The company that I got the waterstone from agreed to send a replacement immediately, even before they got mine back. My question is does Tormek produce another stone of this fine a grade just in case that the replacement is no good either. Finally, if my tormek stone does not wobble am I correct in assuming that the other stone was defective? thanx
You can use less of more but you cannot make more of less.

Jeff Farris

They have been have quite a problem with those lately.

We have a fine grade stone coming out in a couple of months.
Jeff Farris