News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Sharpening Carbide?

Started by ealbers, June 16, 2008, 08:26:02 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ealbers

June 16, 2008, 08:26:02 PM
Can the Tormek system sharpen carbide tips?

Jeff Farris

#1
June 17, 2008, 01:22:10 PM
In September we will be introducing a new grindstone (SB-250) designed for faster stock removal on HSS and exotic alloys.  It will touch up carbide, but is not adequate for shaping or serious nick removal. The standard SG-250 is not suitable for carbide at all.
Jeff Farris
Print
Go Up Pages1
User actions