News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Sharpening a Pizza cutter blade

Started by John Hancock Sr, July 19, 2023, 12:51:37 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

John Hancock Sr

July 19, 2023, 12:51:37 AM
A local (to me) knife sharpener was asked if he could sharpen a round blade from a pizza cutter by his local pizza shop. Here is the result of his investigations. Interesting.

https://youtu.be/CELSYmNsnXM

cbwx34

#1
July 19, 2023, 02:45:52 AM
Quote from: JohnHancock on July 19, 2023, 12:51:37 AMA local (to me) knife sharpener was asked if he could sharpen a round blade from a pizza cutter by his local pizza shop. Here is the result of his investigations. Interesting.

https://youtu.be/CELSYmNsnXM

It's similar to what Rich Colvin has on his website:

Rotary Cutters
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

3D Anvil

#2
July 19, 2023, 02:57:27 PM
An alternative would be using the RBS-140 jig (T-2) in conjunction with a front vertical base, as demonstrated by Hanns here:
https://www.youtube.com/watch?v=UFgFPrZfzZM
Print
Go Up Pages1
User actions