News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Different Angle Guide Setup

Started by cbwx34, June 10, 2023, 03:11:11 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

cbwx34

June 10, 2023, 03:11:11 PM
Ran across this in a FB group...

You cannot view this attachment.

You cannot view this attachment.

https://www.facebook.com/groups/251233948371661/permalink/2380392172122484
(Unfortunately, you have to join the group to see the post.)

Sort of a variation of a Platform Jig I suppose.  Haven't tried it, just thought I'd pass it along!  :)
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

tgbto

#1
June 12, 2023, 04:01:54 PM
Nice, that's what I tried to get to as mentioned on this thread, but obviously it's easier to have thin edges made of metal...

I'm quite sure there should be something "in between", 3D-printable, with built-in holes for a HUSB and VUSB...
Print
Go Up Pages1
User actions