News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

New Tormek T2 is noisy

Started by JayPique, October 09, 2022, 04:22:29 PM

Previous topic - Next topic

JayPique

I purchased a T2 recently and was surprised at how loud it was since I had watched youtube videos of others that were very quiet.
I've uploaded my own 14 second video to youtube and was wondering if any of the T2 owners here could let me know what they thought.
Thank you.
Here is the link:  https://youtu.be/KxODjgmKsG8


cbwx34

Quote from: JayPique on October 09, 2022, 04:22:29 PM
I purchased a T2 recently and was surprised at how loud it was since I had watched youtube videos of others that were very quiet.
I've uploaded my own 14 second video to youtube and was wondering if any of the T2 owners here could let me know what they thought.
Thank you.
Here is the link:  https://youtu.be/KxODjgmKsG8

I would put the grinding wheel on, and make sure everything is tightened down, then see how it sounds.  If it's still loud, email Tormek Support and see what they say.

(BTW, if you run it without the grinding wheel the shaft can come out).
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

JayPique

Ah yes - I forgot I had the diamond wheel off for the video.  It sounds the same with it on, the place I bought it said to take it off and let them know if it still sounded loud.

Ken S

Jay,

Welcome to the forum. I agree with CB. Email your video to Tormek Support. (support@tormek.se).

Ken

JayPique

Thanks for the replies.  I will contact Tormek and see what they say.