News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Which diamond stone?

Started by Tremblers, March 24, 2021, 03:15:58 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Tremblers

March 24, 2021, 03:15:58 PM
I want to upgrade to a diamond stone for my Tormek SuperGrind 2000 which I use primarily for regrinding plane blades and chisels. I am undecided whether to get the 360G or 600G stone.  I am told that, over time, diamond stones become finer and so am leaning towards the 360G. Any advice would be welcome.
Thanks
Mike

RichColvin

#1
March 27, 2021, 04:04:31 AM
Mike,

Review this https://sharpeninghandbook.info/Info-WoodBenchTools.html.

Kind regards,
Rich
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.
Print
Go Up Pages1
User actions