News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Q2 inside bevels on gouges

Started by Ukfraser, August 02, 2020, 02:52:13 PM

Previous topic - Next topic

Ukfraser

Am i correct that these gouges will still need to be sharpened by hand as the bevels are on the inside?

cbwx34

#1
Quote from: Ukfraser on August 02, 2020, 02:52:13 PM
Am i correct that these gouges will still need to be sharpened by hand as the bevels are on the inside?

This I don't know... but you might want to take a look at Rich Colvin's site: 

http://sharpeninghandbook.info/

He has a lot of info on how to sharpen various tools.
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

Ken S

You can refresh the edges using the leather contour disks. For actual sharpening, I would use wooden dowels (matching the arc) with wet or dry sandpaper. Adhesive backed works well or you can use glue or Scotch tape.
When you are making up these dowel sticks, make them in several grits, including very fine.

Ken