News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Flat bevel on the side of CBN/Diamond Wheels

Started by Fluehue, July 02, 2020, 04:21:04 PM

Previous topic - Next topic

Fluehue

Have anyone come up with a way to sharpen knives on the side of the wheel?

cbwx34

Quote from: Fluehue on July 02, 2020, 04:21:04 PM
Have anyone come up with a way to sharpen knives on the side of the wheel?

In theory only... I never did much beyond this thread: 

https://forum.tormek.com/index.php?topic=3789.0

I think it's doable though.
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

smurfs

#2
Wootz at Knife Grinders uses this approach in volume sharpening documented here, so yes it works but you will have to devise a jig system.

Edit: fixed hyperlink

Hannsi1957


Ken S


RickKrung

Quote from: Hannsi1957 on July 05, 2020, 06:54:34 AM
Ich frage mich wozu??

Volume sharpening in a professional sharpening shop.  No jigs, just draw the blade across (however many times) and move on to the next grit size smaller.  Requires grit on both sides of the wheels, so cannot be done with Tormek wheels.  I do not know what has become of the system in Knife Grinders' shop. 

Rick
Quality is like buying oats.  If you want nice, clean, fresh oats, you must pay a fair price. However, if you can be satisfied with oats that have already been through the horse, that comes at a lower price.