How to make a honing stand for t4

[Edwe]

Thanx Gord

[Ken S]

I purchased a VFB from Wootz (KnifeGrinders in Australia). I have not had a chance to use it yet, however, it looks well designed and manufactured. I regard Wootz highly. The other versions also seem impressive to me.

For the mere mortals among us, which includes me, I think controlled honing will consistently produce sharper results than freehand. A VFB seems a logical aid. I plan to incorporate mine into my standard knife sharpening technique.

Ken

[Edwe]

I purchased a VFB from Wootz (KnifeGrinders in Australia). I have not had a chance to use it yet, however, it looks well designed and manufactured. I regard Wootz highly. The other versions also seem impressive to me.

For the mere mortals among us, which includes me, I think controlled honing will consistently produce sharper results than freehand. A VFB seems a logical aid. I plan to incorporate mine into my standard knife sharpening technique.

Ken

+1 on that Ken
Lets see tomorrow what I can achieve

[Edwe]

Hopes pictures shows for all of you, its a bit hassling sharing Google photos.
Thanks all for your support in this projekt

[Ken S]

Well done, Edwe!

Ken

[Edwe]

Just did a quick test, both with a new sharpened and just honed a bit dull knife.
Made a big difference for me 

[cbwx34]

...
Hopes pictures shows for all of you, its a bit hassling sharing Google photos.
Thanks all for your support in this projekt

I can't see 'em. 

[Edwe]

Darn, I did check both with Chrome and IE even not logged in to the forum 

Now? I did an adjustment

[cbwx34]

Darn, I did check both with Chrome and IE even not logged in to the forum 

Now?

I can see that one.

An alternative method (may be easier?) is to save the pic to your computer... then just attach it to the post (I attached your picture below).  (You can then copy the link and insert it back into the post if you want)...



The FVB looks great!  Thanks!

[wootz]

We program Windows software to set grinding/honing angle on home-made Frontal Vertical Base (Windows only) - details on our website
http://knifegrinders.com.au/11Shop.htm