News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Newbie questions about the Stone Grader SP-650

Started by Hatchcanyon, May 05, 2016, 05:11:24 PM

Previous topic - Next topic

Stickan

Hi,

The grid in the stonegrader and the SB-250 are close in hardness. The grid in the stonegrader is larger and bound harder.
A trick is to use the stonegraders edge and use more pressure than on the SG stones.
Then you will remove more binding material and the stone becomes active.

Stig

Ken S

Thanks, Stig.

I will put your advice to use in my new on order stone grader. I do believe the SB-250 is generally not well understood on the forum.

Ken

Hatchcanyon

Hi Stig,

thank you for the explanation. That explains the "polishing" of the grader after using it on the SB stone in a standard pattern, that means more or less flat.

Rolf

German with a second home in the American Southwestern Desert - loves Old England too.