Gerber - Bear Grylls

[Lillis]

Im not a big fan of serrated knife blades, atleast not on my camping knifes.
So i tried making a new bevel and Im very pleased with the result. It looks a little weird at the bottom of the blade, closest to the handle. But i dont know how to make it look better, since the blade is smaller.
Before and after pics.

[grepper]

Nice job, especially considering how much metal you had to remove and completely reform the edge.  I too  have found that area right up by the bolster can be tricky.

[Herman Trivilino]

It looks a little weird at the bottom of the blade, closest to the handle.

That's the transition from the cutting edge to the bolster. Even if you don't modify a knife in the way you have, you will still have to face this issue with a knife after it's been sharpened many many times.

There's not much you could do to improve upon what you've done. Maybe get in there with a grinder or file and extend the cutting edge all the way to the bolster. On a non-folding knife you can file down the bolster itself, but you have to be careful doing that with a folding knife as it may interfere with the operation of folding the blade. Having the blade fold in too far is a bummer as it makes it hard to unfold the knife.