News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

compound

Started by epw314, August 24, 2005, 09:34:23 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

epw314

August 24, 2005, 09:34:23 PM
I was just curious, after some time should you scrape off the old compound and add new? Or should you just keep on adding new every 5 or 6 projects?
Thanks,
Ed
Ed Weigman

Anything Sharp
172 Mountain Lake Estates
Hawley,Pa 18428
570 685 9755

Jeff Farris

#1
August 25, 2005, 04:45:28 AM
No need to clean. Just put one very thin stripe all the way around the wheel about every 3 to 4 tools.
Jeff Farris
Print
Go Up Pages1
User actions