SJ-250

[rickbw]

I have a Tormek 2000 which I haven't used for several years.  I would like to start using it to sharpen my hand planes (old and new) and am considering using the SJ-250.  I have both an 8000 and 16000 Shapton stone, for continuing sharpening past 4000.  How difficult is it to switch stones on the 2000?  I would like to continue to use the original stone also.   Thx.

[Ken S]

With the original shaft, changing wheels is doable.  If you replace the shaft with the new EZYlock shaft, changing wheels is a snap.  I upgraded to the EZYlock with no regrets.

If you plan to routinely use the two finer Shapton stones, I question the practicality of purchasing the SJ-250.

I happen to have an SJ-250 which I have not yet used.  I purchased it during a very good sale at my local Tormek dealer.  My long term plan is to eventually add a second Tormek unit for the SJ and SB wheels.

With only one Tormek I think you would be just as far ahead to become proficient with the leather honing wheel and go on to the Shapton stones if you wish.

Keep us posted.

Ken

[rickbw]

Thanks.  I'll follow your advice 1st and let you know.