SVD-005

[Vilhjalmur_Sigurjonsson]

Hi,
recently bought the SVD-005 upgrade, but to my surprise it had 8mm screw. My old tool was fitted with a 6mm screw.
I quickly turned a replacement insert to have it fit, but was wondering if this was normal?
V.

[Jeff Farris]

The first generation of the SVD-180 used a 6mm screw. That production was quite short-lived. The subsequent version used an 8mm screw. The 8mm insert is available on request, at no charge, from the Tormek importer in your country.

[Vilhjalmur_Sigurjonsson]

Jeff,
thanks for the clarification, I bought mine just when it was first introduced.
I won't be needing the insert as I made one myself, but I was a little confused as it was not mentioned in the leaflet that there had been two versions.
V.