Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.

Main Menu

stone grit for sharpening jointer blade

Started by bnlsrv, March 26, 2004, 03:08:20 PM

Previous topic - Next topic


Having read the book, and planer / jointer jig instructions I don't see what grit the stone should be at when I sharpen my jointer blade. Anyone know? ???
Bill in the midwest.

Jeff Farris

You will almost undoubtedly need the fast cut (220).  Do all three blades, then grade the stone and do all three blades again at the fine cut.
Jeff Farris