Knife sharpening software for T-8

[Jeff_Coates]

What software do people use for angle setting on a T-8?

I stopped using a T-8  about 5 years ago. At the time I had KnifeGrinders software.

It no longer loads on my i-phone and the app is no longer available in App Store.

Any thoughts?

I primarily sharpen kitchen knives

Thanks

[cbwx34]

What software do people use for angle setting on a T-8?

I stopped using a T-8  about 5 years ago. At the time I had KnifeGrinders software.

It no longer loads on my i-phone and the app is no longer available in App Store.

Any thoughts?

I primarily sharpen kitchen knives

Thanks

Try this one...

https://connect.calcapp.net/?app=dsa8z4

... it's similar to the KG apps you're used to.

(Or check the links in my signature.)

[Ken S]

Jeff,

The Calcapp program that CB mentioned is accurate, quick to learn and use, and uncomplicated. That stated, the new Tormek KS-123 knife setting tool has large made setting programs not as essential as before. I think a combination of the KS-123 and Calcapp as a ready reserve should cover the waterfront.

Ken

[Sir Amwell]

Both ways will work.
If you are batch sharpening, for customers say, then the calcapp is great for setting your usb to a set angle for a set blade projection. Then you need a batch of old style , adjustable svm jigs to enable you set the correct projection for each knife. Just one set up for as many knives/svm jigs you have.
The new angle setting jig and kj jig really comes into its own for say just one knife here and there or a batch of differing knives, grinding angles, blade thicknesses etc.
For example, I just sharpened a dozen kitchen knives all at 15 degrees/side using the first set up. Saved a load of time!
The same customer gave 2 non typical knives to sharpen with extra thick blade stock , wide blades and requiring 20 degrees/ side. The angle setter and self centring kj45 made set up quick and easy.

[RickKrung]

Both ways will work.
If you are batch sharpening, for customers say, then the calcapp is great for setting your usb to a set angle for a set blade projection. Then you need a batch of old style , adjustable svm jigs to enable you set the correct projection for each knife. Just one set up for as many knives/svm jigs you have.
The new angle setting jig and kj jig really comes into its own for say just one knife here and there or a batch of differing knives, grinding angles, blade thicknesses etc.
For example, I just sharpened a dozen kitchen knives all at 15 degrees/side using the first set up. Saved a load of time!
The same customer gave 2 non typical knives to sharpen with extra thick blade stock , wide blades and requiring 20 degrees/ side. The angle setter and self centering kj45 made set up quick and easy.

Congratulations.  You just summed up the whole discussion in a very short, clear, concise manner.  Thank you.  Oh, and by the way, I couldn't agree more...

Rick