News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Tormek will get chisels SHARP

Started by RichColvin, November 22, 2023, 08:40:45 PM

Previous topic - Next topic

RichColvin

I recently re-sharpened my Two Cherries 40mm carpenters chisel after a project.  My process was:

  • Clean up the edge using the SG-250 grindstone, graded to a rough grit
  • Sharpen the edge using the same SG-250 grindstone, graded to a very fine grit
  • Hone on the leather wheel
  • Hone on a paper wheel using red rouge
  • Hone on a paper wheel using jeweler's rouge

When I grabbed one of them today to use it again, I slipped and it cut me pretty badly.  The picture below shows how easily it was to splatter blood (yes, it is my own blood).

You cannot view this attachment.

So, two take-always:

  • The Tormek is more than adequate for sharpening chisels
  • Be careful handling those sharpened tools.
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.

HaioPaio


John Hancock Sr

Many a nick between Tormek and workpiece ;)

Used those Tormek bandaids many times!