Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.

Main Menu

little time, but still many knives to grind. a possible solution

Started by Hannsi1957, July 11, 2020, 08:56:52 PM

Previous topic - Next topic


do you go to the weekly market or to the farmers market to sharpen the knives of the people. or do you have a company that sharpens knives.
how you can speed up your sharpening. with a few little tricks and the right tools it should be possible without any problems.
i have made a short video about this. watch it if you like. english subtitles are included. not perfect but you will understand what i mean.
cheers Hanns

John S


Just to be on the safe side, of course a single laser is sufficient for such a setup. I mounted the second one for demonstration purposes only to show that the setup works. When i set up like this i grind several similar knives in a few minutes always with the same angle because i can always adjust the jig length on the laser.

Cheers Hanns