News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.

www.tormek.com

Main Menu

Testing the sharpness of a knife after sharpening

Started by Ken98660, April 02, 2022, 10:40:35 PM

Previous topic - Next topic

3D Anvil

#15
I have a USB microscope that's very helpful -- much better than the jeweler's loupe I have.

They exaggerate the magnification, but this is basically what it looks like with a 1-2mm edge bevel:

https://smile.amazon.com/gp/product/B084HJ44J5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1



Ken S

3D,

Nice looking USB microscope. Does it happen to have a fine focus control?

Ken

3D Anvil

It has fine focus control of sorts.  The black knob on the back adjusts the height (zoom and course focus) while the gray ring on the barrel does finer focus.  It's a bit fiddly in practice, but not bad.