News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.

www.tormek.com

Main Menu

Front Vertical Base VVB-100 for Tormek

Started by smurfs, March 20, 2020, 11:01:33 PM

Previous topic - Next topic

smurfs

Just giving the heads-up to those in Europe that Wolfknives Feines Werkzeug & Handwerk, based in Germany, are now manufacturing and selling their own FVB for €79 - see product description here (in German).

It probably won't be compatible with the Knife Grinders software but will be easier enough to configure with TormekCalc developed by jvh


BeSharp

Looks like that German company also sells their version of a US-430, but on steroids:

https://www.feines-werkzeug.de/werkzeuge/schaerfen-schleifen/tormek/tormek-zubehoer/4543/lange-universalstuetze-ws-500-fuer-tormek-t-8-t4

Anyone understand German who can tell us what their ad says?

John_B

Quote from: BeSharp on March 27, 2020, 01:28:44 AM
Looks like that German company also sells their version of a US-430, but on steroids:

https://www.feines-werkzeug.de/werkzeuge/schaerfen-schleifen/tormek/tormek-zubehoer/4543/lange-universalstuetze-ws-500-fuer-tormek-t-8-t4

Anyone understand German who can tell us what their ad says?

Here is what it says

ideal for long & wide blades
can be used horizontally & vertically
optimal in connection with the VVB-100
Made in Germany
Description Evaluations 0
Product information "Long universal support WS-500 for Tormek T-8 & T4"
The long universal support WS-500 developed by us is a further extended universal support for the two US-105 and US-430 offered by Tormek. The slightly longer support is particularly helpful for grinding work with very long blades or wide blade edges. This long support shows its full potential in connection with our VVB-100, the front vertical base. The screws on the support allow a precise fine adjustment of the cutting edge angle and the grinding depth.

The long universal support WS-500 is suitable for the Tormek T-8 / T-7 / T-4 / T-3 and earlier Tormek models. The length of the upper grinding guide is 500 mm, the complete height is 220 mm.

It can be positioned in the following positions :

Vertical for grinding against the cutting edge.
Horizontal for grinding with the cutting edge.
Horizontal on the side of the leather honing wheel for peeling.
Related links to "Long universal support WS-500 for Tormek T-8 & T4"
Questions about the article?
Additional items from Wolfknives
Sharpen the knife blade
Hone edge until perfection
Cut with joy and ease