News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.

www.tormek.com

Main Menu

Free Stone Offer

Started by bisonbladesharpening, March 02, 2020, 09:20:54 PM

Previous topic - Next topic

bisonbladesharpening

I received an Email from an online sharpening supplies company that I use,
offering free stones for life ( up to 3 ) on purchase of new T8 or T4
Very interesting offer.
Best wishes,
Tim

cbwx34

Quote from: bisonbladesharpening on March 02, 2020, 09:20:54 PM
I received an Email from an online sharpening supplies company that I use,
offering free stones for life ( up to 3 ) on purchase of new T8 or T4
Very interesting offer.
Best wishes,
Tim

It's actually thru Tormek(pdf), so every seller (in the U.S. at least) should be offering it. ;)

(Do they come 'take you out' after 3)?  ;D
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform. New url!
(or Click HERE to see other calculators available)

chino

I was thinking about another Tormek due to laziness (changing of wheels, etc). Sounds like a decent deal. Thanks

brianchin10

This would have come in handy lately... Oh well.

cbwx34

Quote from: brianchin10 on March 02, 2020, 11:19:50 PM
This would have come in handy lately... Oh well.

Probably not (if you mean your broken stone)... for this to apply, you have to wear the wheel down...

QuoteShould your SG-250 wear down to ∅ 7" /178 mm, or your
SG-200 wear down to ∅ 6" /150 mm, the certificate will
entitle you to a new Tormek Original Grindstone free of
charge.

... and then ship it back to Tormek, to get a new one.
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform. New url!
(or Click HERE to see other calculators available)

Twisted Trees

Quote from: cbwx34 on March 02, 2020, 11:48:15 PM

Probably not (if you mean your broken stone)... for this to apply, you have to wear the wheel down...


Hmmm on my T7 anything below 8" seriously interferes with the sharpening process satisfaction, given that my personal stone use is about ½" a year I don't think I would want to go 2 years of being slightly miffed at poor sharpening performance to get a free stone!

Think I would need a diamond grader and elastic band running 24 / 7 to eat the last 1" of stone  ;)

John_B

This would be a good incentive if you were buying a new unit.
Sharpen the knife blade
Hone edge until perfection
Cut with joy and ease