Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.

Main Menu

Great sayings

Started by RichColvin, December 01, 2019, 01:30:47 PM

Previous topic - Next topic


Saw this in Ornamental Turning by J.H. Evans (1903)

Of all the tools in the workshop whether of the amateur or of the practical man, the absence of the grindstone would be the most severely felt, without it the restoration of the edges of the tools would be scarcely possible, and upon their perfection much of the practical success of cutting processes depends.

Sharp tools produce the least expenditure of time, surfaces so nearly finished as to require but very little polishing, whereas blunt tools leave the lines and moldings less accurately defined, and the additional friction or polishing employed to gloss over the defects makes a bad case worse, and obliterates all the keen edges that would impart to the work a defined and exact character.
Rich Colvin - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.

Ken S

Great quotes, Rich. Thanks for sharing.