Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.www.tormek.com
Started by vitaliki_gmbh, January 29, 2018, 09:46:52 AM
Quote from: vitaliki_gmbh on January 29, 2018, 09:46:52 AMHi guys!Just wondering is there 250mm wheel for Tormek with grain size 7-16 mu?So far as I inderstand jis800 has grain 20mu and jis 4000 only 3 mu, so there is a gap in betweenPlease do not propose paste, i am asking only the wheel.Thank you and have a nice day
Quote from: Ken S on January 29, 2018, 11:24:15 AMThe simplist possibility is to maximize the fine grading with the standard Tormek SG-250 wheel and the stone grader. After several years of using the stone grader, I tried applying it for a much longer time. I was amazed with how much smoother the stone's surface became. Using the stone grader need not be just an either 220 or 1000 grit choice. With more subtle use, it is capable of producing a range of gradations. I was not achieving the full fine grade. I suspect most users have that same situation. As a first possible solution, try using your stone grader for longer than a full minute. That, combined with lighter grinding pressure, may give you the finer grit you desire. The effect of the stone grader can last quite a while with flat blades like knives and chisels.
Quote from: Daniel on January 30, 2018, 12:28:12 AMcbwx34, I think he is talking about some japanese waterstone wheels made by the same company that makes the King bench stones, can't remember its name right now. I have seen them on some webs sold as compatible for Tormek and many other clones. They are sold in those 2 grits, 800 and 4000. I have a King 4000 bench stone and I love it above any 6000+ stone, but the logic behind an 800 grit wheel goes beyond me - King stones have a reputation for being soft, and rightly so. I can imagine a Tormek wheel made of that material would be a nightmare to maintain true and would not last for long either.
Quote from: Stickan on January 29, 2018, 02:01:58 PMHi,When purchasing original Tormek wheels there is no need to use something between our SG and SJ stones.Best,Stig
Page created in 0.017 seconds with 20 queries.