News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.

www.tormek.com

Main Menu

stone has become oval shaped

Started by jeffs55, October 31, 2011, 09:01:21 PM

Previous topic - Next topic

jeffs55

My stone is oval shaped as viewed from the side. When you watch it rotate it rises and falls with the oval high and low areas. Why, and does that require truing? It has no bearing on my ability to sharpen a knife.
You can use less of more but you cannot make more of less.

Jeff Farris

It happens normally. Freehand sharpening encourages it more than using jigs, but it is still normal, either way. The longer you let it go, the more pronounced it will become. I wouldn't be too concerned, but when you notice it, it is generally a good idea to true the wheel.
Jeff Farris