News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Robert Sorby Hardwood Scraper

Started by pennardesign, March 01, 2012, 10:09:51 PM

Previous topic - Next topic

pennardesign

Hi

This is my very first post! I must say I found the post on sharpening a skew chisel very good - I have been pulling my hair out as I thought I'd never get it re-ground - Thanks

Now I have a Robert Sorby hardwood scraper, this has a slight radius and two different angles. My question is how the hell do I sharpen this scraper? HAs anyone else done this, any help would be greatly received.

Thanks

Brian