News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Extended Universal Support Bar for Chinese Cleavers and Long Knives

Started by robincbailey, January 22, 2016, 01:27:46 PM

Previous topic - Next topic

robincbailey

I know have a stock of Wider and Taller Universal Support Bars for sale via my website, these make sharpening wide cleavers and long carver knives a lot easier and possible as the std bar is too short and not wide enough.
You can purchase them via my website
https://www.sharpeningtraining.co.uk/ourshop/prod_6129672-Tormek-Extended-Universal-Support-Bar.html

Ken S

I placed my order earlier this morning. I am pleased your extended support bars are finally available. I look forward to sharpening my favorite Chinese cleaver, and will post a review.

Ken

robincbailey

No problem Ken, and I can ship to anyone worldwide if need be.

udevil


cbwx34

Quote from: udevil on March 26, 2018, 07:07:38 PM
What are the dimensions of this new bar?

Unofficially, I measure  the horizontal bar at about 15 3/8", and the uprights at about 10".

BTW, this appears to be a better link...

https://www.sharpeningtraining.co.uk/ourshop/prod_6129672-Tormek-Extended-Universal-Support-Bar.html
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

Ken S

I can tell you from using the unit I purchased from Robin that it does a nice job of sharpening cleavers. As my longest knife is only eight inches (200mm), I can only guess that it also does a fine job on longer knives.

Ken