Grinding Angle Adjustment Booklet

[RickKrung]

Newbie Here, First Post,

Just recently received a T8 and several jigs. I will be doing primarily drill bits and knives. Watched the videos and reading the manual and everything else I can find.  Came across references to a "Grinding Angle Adjustment booklet" and that it is posted on the forum. I've been searching for where it is posted so I can download it.  Can't find it, so I'm asking for help.

Thanks,

Rick

[cbwx34]

Newbie Here, First Post,

Just recently received a T8 and several jigs. I will be doing primarily drill bits and knives. Watched the videos and reading the manual and everything else I can find.  Came across references to a "Grinding Angle Adjustment booklet" and that it is posted on the forum. I've been searching for where it is posted so I can download it.  Can't find it, so I'm asking for help.

Thanks,

Rick

Welcome to the forum.

I created a page with some links I found useful in the forum (pertaining to knife sharpening)... you'll find it here...  http://wp.me/P93bLq-g.

A link to the booklet is about half way down... but you can also find it in the thread that explains it here...  https://forum.tormek.com/index.php?topic=1849.0.

Enjoy!

[Ken S]

Welcome to the forum, Rick. I highly recommend that you download and/or print out Ton's booklet. (I did both.) It is the basis for the kenjig and related jigs.

Ken