Looking For A Good Microscope...

[darita]

but don't want to spend more than $500.  I was looking at this one, as it gets in pretty close and has good resolution.  Is there one that gets closer with greater resolution and and gets even closer?
https://www.amazon.com/dp/B0B7NKGH1C?ref=ppx_yo2ov_dt_b_product_details&th=1

[RickKrung]

Have you searched the forum for previous discussions on microscopes.  There has been a fair bit of discussion.  Also, on the BESS Exchange.

I've tried quite a variety, up to one USB unit costing $1200.  The best, most versatile, most informative and cheapest has been the Kingmas 60X hand microscope.  Do a search on "Kingmas" to read posts on this question from many forum users. I have three or four of these around my shop and use it for any number of task.  It is also the only magnifier for getting out extremely tiny slivers.

Rick

You cannot view this attachment.

[darita]

Thanks for the info and I'll do that search. I've seen pics that look close, but without great resolution and some that look molecular (exaggeration).

[3D Anvil]

but don't want to spend more than $500.  I was looking at this one, as it gets in pretty close and has good resolution.  Is there one that gets closer with greater resolution and and gets even closer?
https://www.amazon.com/dp/B0B7NKGH1C?ref=ppx_yo2ov_dt_b_product_details&th=1

I had one of those Tomlovs and ended up returning it because it had a decentered lens.  Only about 1/2 of the frame could be brought into focus.

[darita]

Well, I purchased that Tomlov and here's a chisel edge pic.  Thoughts?

[darita]

Here's a knife edge pic after some tweeking of the camera...

[darita]

And another part of that knife edge...

[Drilon]

Have you searched the forum for previous discussions on microscopes.  There has been a fair bit of discussion.  Also, on the BESS Exchange.

I've tried quite a variety, up to one USB unit costing $1200.  The best, most versatile, most informative and cheapest has been the Kingmas 60X hand microscope.  Do a search on "Kingmas" to read posts on this question from many forum users. I have three or four of these around my shop and use it for any number of task.  It is also the only magnifier for getting out extremely tiny slivers.

Rick

You cannot view this attachment.

I also use a tiny microscope like yours to check the edge. Perfect for this job!