News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Radius CBN Wheel for Woodturning Tools....

Started by cbwx34, August 04, 2020, 02:53:27 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

cbwx34

August 04, 2020, 02:53:27 PM
Something I ran across, thought some here might find of interest...



https://woodturnerswonders.com/products/free-hander-8-cbn-wheel
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

Ken S

#1
August 04, 2020, 07:49:47 PM
An interesting post, CB.

I'm not a skilled enough turner to have an informed opinion about this grinding wheel. Like so many CBN wheels, it seems targeted to high speed dry grinders. To be fair, dry CBN wheels work very well with dry grinders. Any grinding wheel designed for wet grinding with the Tormek should work well with either plain or with an ACC solution.A wheel designed for a Tormek should also have a 12mm bore and fit "plug and play" on the Tormek.

Ken
Print
Go Up Pages1
User actions