News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

using tormek jigs with a dry grinder

Started by Ken S, February 05, 2014, 10:08:34 PM

Previous topic - Next topic

Ken S

For those of you who have decided to adapt your Tormek jigs to a dry jig, I believe you will find this article useful.  The authors, Williams and Clark, are two of the premier plane makers.

http://www.planemaker.com/articles_grinding.html

Enjoy.

Ken